If y ou have two televisions in your home and only one remote control, you may find that the remote is accidentally controlling both TVs. This can be frustrating if different people are trying to watch a different show on each TV. Luckily, there are ways to stop the TV remote from controlling two TVs.
To stop your TV remote from controlling two or more TVs, either disable the universal remote control function on the TV you do not wish to control which will “unpair” the remote from the TV. You can also get a programmable remote control from which you can determine which device should be controlled from the remote.
Before you continue, you can also check out our guide on how to stop a Roku remote from controlling two TVs. On the other hand, you can also look into ways to control your TV without a remote or even Wifi.
Read on to learn more.
How to Stop a Tv Remote from Controlling Two TVs
If both TVs are using the same type of remote, then you can use the TV’s menu system to disable the universal remote control function.
If the TVs are using different types of remotes, or if one TV is not equipped with a menu system, then you will need to purchase a universal TV remote control that can be programmed to work with both TVs.
Solution 1: Disable the Universal Remote Control Function
Step 1: Disable the Universal Remote Control Function
One way to prevent your TV remote from controlling two TVs is by disabling the universal remote control function on the TV’s menu system.
This can be done by accessing the menu and selecting the “universal remote” option. Once this is selected, look for an option that either enables or disables the remote control function of the TV.
Here is the step-by-step process:
- Open the menu of your TV.
- Go to settings and find a tab named “Remotes” or “Control”.
- Under this tab, open the “Universal remote” option.
- Tap the “OK” button to disable the universal remote feature.
Step 2: Enter a Four-Digit Code
Upon changing this option, you will also be able to enter a four-digit code. This number must match the corresponding code for your universal remote control and should be different from any other codes that may have been programmed into it.
Step 3: Press “OK”
Once all matches are made, select “OK” on your TV’s remote and then exit out of the menu system by pressing “exit.”
At this point, both TVs should only respond to their remotes as long as they do not use the same type as those used by your original TV.
Solution 2: Buy a Universal Programmable Replacement TV Remote Control
Another way to prevent your TV remote from controlling two TVs is by purchasing a universal replacement TV remote control with programmable functions for two separate devices. Such remotes are capable of programming with each TV individually
This will allow you to individually control each TV without any conflicts between them.
Solution 3: Use Insulation Tape
A quick and easy solution to prevent your remote from controlling your two TVs is to simply place a piece of masking tape over the TV’s remote control sensor. This sensor is an infrared light sensor. For your remote to control your TV, the remote sends an infrared signal to the TV. Normally, you can identify the sensor by a red light.
The masking tape will block this signal. Because infrared is light, you need to use insulation tape or a similar opaque tape, the tape cannot be transparent since that will allow light to pass through.
Solution 3: Adjust Your TVs Position
The reason your remote is controlling multiple TVs is that the same infrared signal from your remote is reaching the infrared sensors on multiple TVs. An easy way to prevent this (if possible) is to reposition the TVs that you do not want to control.
If you can reposition the TV that you don’t want to control away from your seating position, you may be able to prevent the remote from reacting with that TV and that will fix the issue.
Try to slant, rotate or otherwise reposition the TV while testing with your remote control.
How to Stop an LG TV Remote from Controlling Two TVs?
If you have an LG TV and multiple TVs in your home, you may have noticed that when you use the remote to change the channel on one TV, it also changes the channel on the other TV.
This can be frustrating if you’re trying to watch two different channels at the same time. Fortunately, there is a way to prevent the LG TV remote from controlling two TVs.
Method 1: Program The Remote Control
Step 1: Set Up a Universal Remote Control
To stop the LG TV remote from controlling two TVs, you’ll need to set up a universal remote control. A universal remote control can be used to control multiple devices, including TVs, Blu-ray players, and stereo systems.
There are many different universal remote controls available on the market, so select one that best suits your needs.
Step 2: Program the remote to work with your LG TV
Once you have a universal remote control, you’ll need to program it to work with your LG TV.
This process will vary depending on the specific model of universal remote control that you have, so consult the user’s manual for instructions. Generally, you’ll need to input the code for your LG TV into the remote control.
Once the universal remote control is programmed, you can use it to control both your LG TV and any other devices that are connected to your home entertainment system.
You can also use it to change the channel on both TVs simultaneously. This will allow you to watch two different channels at the same time without having to worry about accidentally changing the channel on the wrong TV.
Method 2: Use An App
If you don’t want to purchase a universal remote control, you can also try using a remote app on your smartphone or tablet. There are many different remote apps available, so select one that best suits your needs.
Step 1: Install Remote App on Your Smartphone
Once the remote app is installed, open it and make sure that it is paired with your LG TV. The process of pairing will vary depending on the specific remote app that you are using, so consult the user’s manual for instructions.
Step 2: Pair the Remote App with Your LG TV
Once the remote app is paired with your LG TV, you can use it to change the channel on both TVs simultaneously.
This will allow you to watch two different channels at the same time without having to worry about accidentally changing the channel on the wrong TV.
How Do I Stop My Samsung Remote from Controlling Two TVs?
If you have a Samsung TV and remote, and you’re finding that your remote is controlling two TVs instead of just one, don’t worry – you’re not alone. This is actually a common issue, but there are a few ways to fix it.
Method 1: Re-pair the Remote with Your TV
First, try re-pairing your remote to your TV. To do this, hold down the pairing button on the back of your remote until the red light starts flashing.
Then, locate the pairing buttons on your TV (they’ll be near the power button) and press them. The TV should start beeping; when it does, release the pairing buttons on both the TV and remote.
Method 2: Change the Input Source of Your TV
If that doesn’t work, you may need to change the input source of your TV. To do this, find the INPUT button on your remote (it should be near the directional buttons), then press it repeatedly until you land on the input source of your choosing.
It may take several presses before you get to where you want; once you do, though, make sure that the TV has been set to that specific input for at least five minutes before trying to control it with your remote again.
Can You Change TV Remote Frequency?
The answer is yes you can, there are several ways by which this can be achieved. The first way is through software and the second way is hardware.
Each TV remote has a different frequency, so you will need to find the one that works best for your television. To change the frequency on your remote, follow these steps:
1. Turn on your TV and locate the menu button. This is usually located in the lower-left corner of the screen.
2. Press the menu button and use the arrow buttons to navigate to “Settings.”
3. Scroll down and select “Remote.”
4. Select “Change Remote Control Frequency” and press OK.
5. Use the arrow buttons to select the frequency that works best for your TV.
6. Press OK to save your changes.
Harmony Hub Two TVs
So, you’ve got a Harmony Hub and two TVs in your home. You want to be able to control them both independently, but the TV remote keeps flipping back and forth between them. Here’s how to fix that.
Step 1: Open Up the Harmony App
First, open up the Harmony app on your phone or tablet. Tap on the Devices tab at the bottom of the screen, then tap on the name of your Harmony Hub.
Tap on the Options button in the top-right corner of the screen, then tap on Settings.
Step 2: Change the Remote Setting to Harmony Hub Only
Scroll down until you see the section labeled “Remote Control”. Underneath “Remote behavior when pressing the TV power button”, change the setting from “Universal remote behavior” to “Harmony hub only”.
How to Stop a Remote from Controlling Same Brand TVs?
Method 1: Get a Universal Remote
One way to stop this from happening is to get a universal remote. A universal remote can control multiple devices, including your TV.
This means that you can use the same remote to control all of your devices, regardless of their brand. Not only will this stop your TV remote from interfering with your other devices, but it will also make it easier to control them all.
Method 2: Place the Same Brand Tvs in Different Rooms
Another way to stop your TV remote from interfering with your other devices is to place them in different rooms. If you have your TV in one room and your other devices in another room, the remotes will be less likely to interfere with each other.
Method 3: Use Different Frequencies
You can try using different frequencies for your devices. This can be done by changing the channel on your TV remote.
If you find that your TV remote is interfering with your other devices, try switching to a different frequency. This may not be an option for everyone, but it can be a useful solution if it works for you.
Tv Remote Interference
Method 1: Try Using a Different Remote Control for Your TV
There are a few things you can do to stop your tv remote from interfering with other devices. First, try using a different remote control for your TV. If that doesn’t work, you can also try moving the TV away from other devices or turning off any extra electronics in the room.
Method 2: Buy a Signal Amplifier
If all else fails, you can buy a signal amplifier to help reduce interference. No matter what method you choose, it’s important to keep in mind that some amount of interference is inevitable.
So, if you’re having trouble getting your remote to work properly, always try first restarting the TV and/or the device you’re trying to control. Chances are that this will fix the issue without having to resort to more drastic measures.
being able to have full remote control of your TV is important not only for simple things like changing channels, but also for more complex operations like connecting your home theater system to your TV and cable box.
Now that you have learned how to stop your TV remote from controlling two TVs, sit down and relax. By following the simple steps outlined in this article, you can be sure that your remote will only operate one TV at a time. This will help to reduce confusion and ensure that each TV is used for its intended purpose.
Norvan Martin is the founder of BoomSpeaker.com. He is a professional Electronics Engineer and is passionate about home theater systems and AV electronics. BoomSpeaker was created as an online hub to share his knowledge and experiences as it relates to home theaters and home audio electronics.