How To Hook Up a DVD Red Blue Green Cable To a TV

Norvan Martin
As an Amazon Associate, we earn from qualifying purchases made on our website.

Linking your DVD player and television using red, blue, and green cables may seem complicated at first. With proper instructions, however, this task should become straightforward in no time at all – in this guide, we’ll walk through all the steps necessary to connect it successfully!

Connecting your DVD to reg, blue, and green ports means connecting the DVD to the component video ports. Let’s quickly understand what these ports are used for.

The red, blue, and green cables and ports are for component video and only transmit video information. The green cable (also called Y) transmits the brightness information of the signal. The blue and red cables (called Pb and Pr, respectively) transmit the blue and red components of the picture’s color.

To transmit audio, you will still need the red (right) and white (left) left and right cables.

DVD TV
Red (Pr) Red – V (Pr/Cr)
Blue (Pb) Blue – U (Pb/Cb)
Green (Y) Green – Y
   
L (white) L (white)
R R

Please see an example below:

How To Hook Up a DVD Red Blue Green Cable To a TV Component

Here is another example of the same connection:

how to connect dvd player to tv red blue green component video

Below is a more detailed walkthrough of the process.

Step 1: Verify TV and DVD Player Compatibility

Before connecting your DVD player with your television using red, blue, and green cables, ensure both devices are compatible.

DVD Red Blue Green Cable

Double-check all ports on both TV and DVD players that contain necessary connections – for instance, on the TV this might look like having sets of Component Video inputs labeled “Y”, Pb” and Pr which should mirror those found on both players.

However when checking connections you could also verify which sets have their connections for instance your TV should have four “Y”, Pb” and Pr outputs respectively so the pair should match.

Step 2: Switch Off the TV and DVD Player

To prevent electrical damage or accidents from taking place, before connecting any cables you must turn both TV and DVD off first to ensure no accidents happen. This step helps avoid electrical shock hazards.

Step 3: Connect Component Video Cables

To connect component video cables from your DVD player to the television screen, use red, blue, and green component video cables from each source – red into “Pr”, blue into “Pb”, and green into “Y”.

Ensure each is plugged in securely before tightening for optimal connection results.

Step 4: Connect Audio Cables

To connect audio cables, insert them into their respective inputs on your television set. These may be red and white cables marked “L” and “R.” To connect red cable to red input marked as such (R), white cable to white input marked L, etc.

Alternatively, if your TV provides separate component video audio input you could connect both of these simultaneously to this input if this option exists.

Step 5: Power on the TV and DVD Player

Once all cables have been securely connected, power up both your television and DVD player. Navigating through their menu systems should find your component video input, which could be labeled either “Component”, “Comp”, or even “AV”.

Step 6: Adjust DVD Player Settings

Once both your television and DVD player have been turned on, adjusting their respective settings could help ensure optimal picture quality.

Accessing your DVD’s setup menu, navigate directly to video output settings and choose the component video output option; set the resolution accordingly with the capabilities of the TV screen.

Step 7: Test the DVD Player

Once the settings have been adjusted, insert and play a DVD to verify picture quality and adjust as necessary; if picture quality remains mediocre or worsens further, check cables for loose connections or damage before returning it to its slot.

Step 8: Adjust TV Settings

If the picture quality remains subpar, adjusting your television settings might help. Navigating into its menu, navigate directly to its picture settings section and adjust contrast, brightness, and color settings until your desired picture quality has been reached.

Step 9: Enjoy Your DVD Player

Once your DVD Player has been successfully connected to the television with red, blue, and green cables, it is now time for some viewing!

When finished watching films or shows make sure both TV and player are switched off as soon as they are not being used to avoid electrical damage and save energy costs in future use.

Conclusion

Connecting a DVD player to a television using red, blue, and green cables is an efficient and effortless way to watch high-definition movies and TV show releases in HD. By following the steps outlined herein you’ll easily set up your player with your TV and identify and correct any potential problems along the way.

HDMI cables may have become increasingly popular recently but component video cables still offer viable solutions for older devices or television sets without HDMI ports – with patience and attention to detail you can connect your DVD player quickly with red blue and green cables to start enjoying media content right away!           

Share This Article
Follow:
Norvan Martin is the founder of BoomSpeaker.com. He is a professional Electronics Engineer and is passionate about home theater systems and AV electronics. BoomSpeaker was created as an online hub to share his knowledge and experiences as it relates to home theaters and home audio electronics. My email: [email protected]  Connect on Pinterest and Linkedin